1. Size:
Copper core dimension
- Width: 1.3-2.5 mm +/- 0.08
- Thickness: ≤0.20 mm +/- 0.008
2. Chemical Composition Base Material:
Material
- CDA 102 – ASTM B170
- CDA 110 – ASTM B5
- ETP1 – DIN EN 13602
- Cu-OF1 – DIN EN 13602
3. Mechanical Properties:
Measurement method: The pull force is measured on the finished copper wire after annealing. The pull force is then divided by the total nominal cross section of the copper core only. Testing is done in accordance with SEMI PV RIBBON STANDARDS PV018-0811 and PV019-0811- Tensile Strength: max 270 N/mm²
- Yield Strength: max 90 N/mm²
- Elongation: min 25%
- According to Customer Specifications
4. Coating:
Solder Coated Copper Wire – All sides coated
- Leaded Solder Alloys Sn62Pb36Ag2 and Sn60Pb40
- Lead Free Solder Alloys Sn100 and Sn96.5Ag3.5
- Other solder alloys are available on request
Solder Coating Thickness 16-24 µm PEAK
*According to Customer Specifications
Peak Average
5. Straightness:
Measuring Method: Freely suspend ribbon sample weighted with 10g
- Camber: 8mm max in 1m
6. Packing:
Traverse Wound Spool Packaging Information
Spool:
- 10S
- 20H
- P5R/JP5
- PV300 – Only Available in UST-Austria
- Other spools are available on request
Spool Dimensions
Ulbrich |
d1 |
d2 |
d3 |
d4 |
L1 |
L2 |
L3 |
Capacity |
Spool # |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
kgs |
10S |
152 |
102 |
16 |
10 |
122 |
102 |
19 |
4.5 |
20H |
160 |
100 |
22 |
13 |
160 |
128 |
32 |
8.0 |
P5R/JP5 |
160 |
90 |
20 |
13 |
114 |
90 |
32 |
4.5 |
PV300* |
300 |
215 |
22 |
13 |
132 |
100 |
32 |
18.0 |
NOTE: The information provided above is based on our current standard knowledge and does not claim to be exhaustive. This information may not be passed on to third parties without approval by Ulbrich Solar Technologies, Inc.